3rd Row Seat Normal/Stow Switch Circuit High
Table of contents
B1E29 JEEP Possible Causes
- Faulty Power Folding Seat Switch
- Power Folding Seat Switch harness is open or shorted
- Power Folding Seat Switch circuit poor electrical connection
- Faulty Power Rear Folding Seat Module
How do I fix code B1E29 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1E29 JEEP code
The cost of diagnosing the B1E29 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1E29 JEEP Description
The Power Rear Folding Seat Module monitors the 3rd Row Seat Normal/Stow Switch. When the Power Rear Folding Seat Module senses voltage over 4.9 volts on the (P277) Normal/Stow Switch MUX circuit for longer than 300 milliseconds, this code will set.