Rear Sun Shade Switch
Table of contents
B1ED2 JEEP Possible Causes
- Faulty Rear Sun Shade Switch
- Rear Sun Shade Switch harness is open or shorted
- Rear Sun Shade Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B1ED2 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B1ED2 JEEP code
The cost of diagnosing the B1ED2 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1ED2 JEEP Description
The Body Control Module (BCM) monitors the Rear Sun Shade Switch. The BCM sets the OBDII code when it detects the Rear Sun Shade Switch is active for greater than 12 seconds or less than 50.0 Ohms or 0.05 volts on the Rear Sun Shade Switch Signal circuit for greater than 10 seconds.