Mirror Control Sensor Position Circuit
Table of contents
B1F06 RAM Possible Causes
- Faulty Exterior Mirror
- Exterior Mirror harness is open or shorted
- Exterior Mirror circuit poor electrical connection
- Faulty Door Module
How do I fix code B1F06 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B1F06-12 MIRROR CONTROL SENSOR POSITION CIRCUIT SHORT TO BATTERY
- B1F06-14 MIRROR CONTROL SENSOR POSITION CIRCUIT SHORT TO GROUND OR OPEN
Cost of diagnosing the B1F06 RAM code
The cost of diagnosing the B1F06 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B1F06 RAM Description
The mirror position sensor is used in conjunction with the memory system. Anytime the mirror changes position, the sensor changes its value. That value is stored in the door module. When a command from the memory set switch is received, the module will position the mirror to the exact position chosen by the particular driver. The Door Module will set the OBDII code when Door Module senses a short to battery, open or short to ground on either the 5-volt supply, the mirror horizontal signal or the mirror vertical position signal circuit.