Starter Relay OFF
Table of contents
B210E NISSAN Possible Causes
- Faulty Intelligent Power Distribution Module (IPDM)
- Intelligent Power Distribution Module (IPDM) harness is open or shorted
- Intelligent Power Distribution Module (IPDM) circuit poor electrical connection
How do I fix code B210E NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B210E NISSAN code
The cost of diagnosing the B210E NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B210E NISSAN Description
Located in the Intelligent Power Distribution Module (IPDM) Engine Room (E/R), it runs the starter motor. The starter relay is turned ON by the Body Control Module (BCM) when the ignition switch is in START position. IPDM E/R transmits the starter relay ON signal to BCM via CAN communication. The OBDII code sets when the IPDM E/R detects that the relay is stuck at OFF position even if the followings condition are met for about 1 second: Starter control relay ON/OFF signal from BCM and Clutch interlock or shift park neutral position (PNP) switch input.