PNP/Clutch Interlock Switch
Table of contents
B210F NISSAN Possible Causes
- Faulty Clutch Interlock Switch (M/T models)
- Faulty Park/Neutral Position (PNP) Switch (A/T models)
- Clutch Interlock Switch (M/T models) or Park/Neutral Position (PNP) Switch (A/T models) harness is open or shorted
- Clutch Interlock Switch (M/T models) or Park/Neutral Position (PNP) Switch (A/T models) circuit poor electrical connection
How do I fix code B210F NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B210F NISSAN code
The cost of diagnosing the B210F NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B210F NISSAN Description
The Intelligent Power Distribution Module (IPDM) Engine Room (E/R) confirms the shift position with the following signals: Park/Neutral Position (PNP) Switch (A/T models), Clutch Interlock Switch (M/T models) and Shift Position Signal from Body Control Module (BCM). The OBDII code sets when the IPDM E/R detects a mismatch between the following signals for 1 second or more: Clutch Interlock Switch (M/T models), Shift PNP Switch input signal (A/T models) and Shift Position Signal from Body Control Module (BCM).