Ignition Run/Start Input Circuit Open
Table of contents
B212C JEEP Possible Causes
- Faulty Ignition Switch
- Ignition Switch harness is open or shorted
- Ignition Switch circuit poor electrical connection
- Faulty Occupant Classification Module (OCM)
- Faulty Occupant Restraint Controller (ORC)
How do I fix code B212C JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B212C JEEP code
The cost of diagnosing the B212C JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B212C JEEP Description
The Occupant Classification Module (OCM) monitors the Ignition Run/Start Input Circuit. The OCM sets the OBDII codes if the voltage on the Fused Ignition Switch Output (Run-Start) circuit drops below 6.0 volts.