Ignition Unlock Run/Start Control Circuit Low
Table of contents
B2184 RAM Possible Causes
- Faulty Ignition Switch
- Ignition Switch harness is open or shorted
- Ignition Switch circuit poor electrical connection
- Faulty Front Control Module
How do I fix code B2184 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2184 RAM code
The cost of diagnosing the B2184 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2184 RAM Description
The Front Control Module will set this Diagnostic Trouble Code (DTC) within 500ms if the fused ignition switch output circuit voltage is less than the expected value.