Ignition Unlock Run/Start Control Circuit Overcurrent
Table of contents
B219A JEEP Possible Causes
- Faulty Ignition Switch
- Ignition Switch harness is open or shorted
- Ignition Switch circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How do I fix code B219A JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B219A JEEP code
The cost of diagnosing the B219A JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B219A JEEP Description
The Totally Integrated Power Module (TIPM) monitors the Ignition Unlock Run/Start Control Circuit. The TIPM sets the OBDII code when an overcurrent condition is detected on the Fused Ignition Switch Output (Off-Run-Start) circuit.