Right Window Up Switch Fault
Table of contents
B2203 CADILLAC Possible Causes
- Faulty Right Window Up Switch
- Right Window Up Switch harness is open or shorted
- Right Window Up Switch circuit poor electrical connection
- Faulty Passenger Door Module (PDM)
How do I fix code B2203 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2203 CADILLAC code
The cost of diagnosing the B2203 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2203 CADILLAC Description
The driver or passenger door switch signal circuits provide inputs to the Driver Door Module (DDM) or Passenger Door Module (PDM) when a window switch is activated to the UP or DOWN position. These inputs allow the door module to detect a window UP or DOWN request. The door modules provide power and ground to the window switches. When a window switch is activated to the UP or DOWN position, ground is supplied through the window switch to the signal circuit, which is pulled low. When the door module detects low voltage on the signal circuit, it will command the window in the UP or DOWN direction. When the switch is released, the command ceases. The door modules monitor the signal circuits to determine how long the ground has been applied. If the door module detects that a ground is applied for greater than 20 seconds, a Diagnostic Trouble Code (DTC) is set.