Occupant Restraint Controller Internal 2
Table of contents
B2208 RAM Possible Causes
- Faulty Occupant Restraint Controller (ORC)
- Occupant Restraint Controller (ORC) harness is open or shorted
- Occupant Restraint Controller (ORC) circuit poor electrical connection
How do I fix code B2208 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2208 RAM code
The cost of diagnosing the B2208 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B2208 RAM Description
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. The repair of this fault condition does not involve any external circuitry and centers on verifying the integrity of the module’s internal circuitry and software validity.
When Monitored the ORC checks the status and validity of the internal operating hardware and software at power up during the initialization process, and continuing through the ignition cycle.
Set Condition this Diagnostic Trouble Code (DTC) sets when a fault is detected internal to ORC hardware and/or software. Once set, this DTC is latched for the entire power cycle. If the same failure is detected in two consecutive power cycles, this DTC is latched active indefinitely.