Power Slide Door Pulse Sensor Malfunction On Rear Right Door
Table of contents
B2223 TOYOTA Possible Causes
- Faulty Power Slide Door Lock Assembly Right (RH) (Slide Door Lock Motor RH)
- Power Slide Door Lock Assembly Right harness is open or shorted
- Power Slide Door Lock Assembly Right circuit poor electrical connection
- Faulty Slide Door Motor Unit RH (Power Slide Door ECU RH)
How do I fix code B2223 TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2223 TOYOTA code
The cost of diagnosing the B2223 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2223 TOYOTA Description
A pulse sensor is built into the Slide Door Right (RH) for jam and foreign object detection and for slide door position detection. The pulse sensor monitors the operating speed of the slide door while the power slide door is moving. The pulse sensor monitors where the slide door is. If the pulse signal is out of the normal range, the power slide door ECU RH will store DTC B2223.
If DTC B2223 is stored, the power slide door system will be turned off. Thus, the slide door can be moved freely and will be switched to manual operation mode (not electrically controlled).
In order to restore the power slide door system to normal operation mode, first repair the malfunction indicated by DTC B2223 and then manually close the slide door fully (reset operation).