Right Mirror Select Switch Fault
Table of contents
B2224 CADILLAC Possible Causes
- Faulty Right Mirror Select Switch
- Right Mirror Select Switch harness is open or shorted
- Right Mirror Select Switch circuit poor electrical connection
- Faulty Passenger Door Module (PDM)
How do I fix code B2224 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2224 CADILLAC code
The cost of diagnosing the B2224 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2224 CADILLAC Description
The driver door switch signal circuits provide inputs to the Driver Door Module (DDM) when a mirror select switch is activated. These inputs allow the DDM to detect a Left (LH) or Right (RH) mirror request. The DDM provides power and ground to the mirror select switches. When a mirror select switch is activated, ground is supplied through the mirror select switch to the signal circuit, which is pulled low. When the DDM detects low voltage on the signal circuit, it will command the mirror in the direction selected. The DDM controls RH mirror functions by sending mirror control messages to the Passenger Door Module (PDM) on the serial data line and the PDM then commands the RH mirror. The DDM monitors both the LH and RH mirror select switch signal circuits to determine how long a ground has been applied. If the DDM detects that a ground is applied for greater than 20 seconds, a Diagnostic Trouble Code (DTC) is set.