Mirror Left Switch Fault
Table of contents
B2228 CADILLAC Possible Causes
- Faulty Mirror Left Switch
- Mirror Left Switch harness is open or shorted
- Mirror Left Switch circuit poor electrical connection
- Faulty Driver Door Module (DDM)
How do I fix code B2228 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2228 CADILLAC code
The cost of diagnosing the B2228 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2228 CADILLAC Description
The driver door switch signal circuits provide inputs to the Driver Door Module (DDM) when the mirror switch is activated. These inputs allow the DDM to detect a mirror direction request. The DDM provides both power and ground to the mirror switches. When a mirror switch is activated to the right, left, up or down position, ground is supplied through the mirror switch to the signal circuit, which is pulled low. When the DDM detects low voltage on the signal circuit, it will command the mirror to rotate in the direction selected. The DDM controls passenger mirror functions by sending mirror control messages to the Passenger Door Module (PDM) on the serial data line and the PDM then commands the passenger mirror. The DDM monitors both the driver and passenger mirror switch signal circuits to determine how long a ground has been applied. If the DDM detects that a ground is applied for greater than 20 seconds, a Diagnostic Trouble Code (DTC) is set.