Tail Gate Panel Position Switch Right
Table of contents
B225A TOYOTA Possible Causes
- Faulty Lower Tail Gate Lock Assembly Right (RH)
- Lower Tail Gate Lock Assembly Right harness is open or shorted
- Lower Tail Gate Lock Assembly Right circuit poor electrical connection
- Faulty No. 2 Main Body ECU
- Faulty Power Back Door Unit Assembly (Power Back Door ECU)
How do I fix code B225A TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B225A TOYOTA code
The cost of diagnosing the B225A TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B225A TOYOTA Description
The No. 2 Main Body ECU receives the close position switch signal from the Lower Tail Gate Lock Assembly Right (RH) and detects the open/closed status of the Lower Tail Gate. The Diagnostic Trouble Code (DTC) B225A is stored when the No. 2 main body ECU receives a close position switch malfunction signal from the Lower Tail Gate Lock Assembly RH.