Power Slide Door Neutral Closer Switch Left Malfunction During Close Operation
Table of contents
B225F TOYOTA Possible Causes
- Faulty Power Slide Door Lock Assembly Left (LH)
- Power Slide Door Lock Assembly Left harness is open or shorted
- Power Slide Door Lock Assembly Left circuit poor electrical connection
- Faulty Slide Door Motor Unit Left (LH) (Power Slide Door ECU LH)
How do I fix code B225F TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B225F TOYOTA code
The cost of diagnosing the B225F TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B225F TOYOTA Description
The neutral position switch is installed to the Power Slide Door Lock Assembly, and detects the neutral position of the active closer lever. During a slide door close operation, if the neutral position cannot be accurately detected due to a malfunction in either the Neutral Position Switch (NPR) or Neutral Position Switch (NPC) signal, the Power Slide Door ECU stores a Diagnostic Trouble Code (DTC).