Left Blend Door Motor Stalled
Table of contents
B226C LINCOLN Possible Causes
- Faulty Left Blend Door Actuator
- Left Blend Door Actuator harness is open or shorted
- Left Blend Door Actuator circuit poor electrical connection
- Faulty Electronic Manual Temperature Control (EMTC) or Electronic Automatic Temperature Control (EATC)
How do I fix code B226C LINCOLN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B226C LINCOLN code
The cost of diagnosing the B226C LINCOLN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B226C LINCOLN Description
Under normal operation, to rotate the blend door actuator, the Electronic Manual Temperature Control (EMTC) or Electronic Automatic Temperature Control (EATC) module supplies voltage to the actuator motors through the door actuator clockwise circuits, and supplies ground through the door actuator counterclockwise circuits. To reverse the actuator rotation, the EMTC module or EATC module reverses the voltage and ground circuits.
The actuator feedback resistors are supplied a ground from the EMTC module or EATC module by the door actuator return circuits and a 5-volt reference voltage on the door actuator reference circuits. The EMTC module or EATC module reads the voltage on the blend door actuator feedback circuits to determine the door actuator position, by the position of the actuator feedback resistor wiper arm.