Vehicle Speed Sensor Malfunction
Table of contents
B2283 TOYOTA Possible Causes
- Faulty Combination Meter
- Faulty Vehicle Speed Sensor
- Faulty Skid Control ECU
- Faulty Main Body ECU
- Main Body ECU harness is open or shorted
- Main Body ECU circuit poor electrical connection
How do I fix code B2283 TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2283 TOYOTA code
The cost of diagnosing the B2283 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2283 TOYOTA Description
The Skid Control ECU converts these signals into 4-pulse signals and sends them to the Combination Meter. After this signal is converted into a more precise rectangular waveform by the waveform shaping circuit inside the combination meter, it is then transmitted to the Main Body ECU. The Main Body ECU determines the vehicle speed based on the frequency of these pulse signals.