Wiper Park Switch Input Circuit Low
Table of contents
B2304 JEEP Possible Causes
- Faulty Wiper Park Switch
- Wiper Park Switch harness is open or shorted
- Wiper Park Switch circuit poor electrical connection
- Faulty Front Wiper Motor
- Faulty Totally Integrated Power Module (TIPM)
How do I fix code B2304 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2304 JEEP code
The cost of diagnosing the B2304 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2304 JEEP Description
The Totally Integrated Power Module (TIPM) provides a reference voltage on the wiper park switch sense circuit through a pull-up resistor that is connected to battery voltage. The Wiper Park Switch switches the signal circuit to the ground when the wiper motor is in the park position. The TIPM detects a short to ground in the wiper park switch sense circuit.