Rear Wiper Park Switch Input Circuit Low
Table of contents
B230D JEEP Possible Causes
- Faulty Rear Wiper Park Switch
- Rear Wiper Park Switch harness is open or shorted
- Rear Wiper Park Switch circuit poor electrical connection
- Faulty Rear Wiper Motor
- Faulty Totally Integrated Power Module (TIPM)
How do I fix code B230D JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B230D JEEP code
The cost of diagnosing the B230D JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B230D JEEP Description
The Totally Integrated Power Module (TIPM) monitors the Rear Wiper Park Switch. The Diagnostic Trouble Code (DTC) sets when the TIPM detects a short to ground on the Rear Wiper Park Switch Sense circuit.