Wiper High/Low Control Circuit
Table of contents
B2316 JEEP Possible Causes
- Faulty Wiper High/Low Relay
- Wiper High/Low Relay harness is open or shorted
- Wiper High/Low Relay circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B2316 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B2316-11 WIPER HIGH/LOW CONTROL CIRCUIT SHORT TO GROUND
- B2316-15 WIPER HIGH/LOW CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
Cost of diagnosing the B2316 JEEP code
The cost of diagnosing the B2316 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2316 JEEP Description
The Body Control Module (BCM) monitors the Wiper High/Low Control Circuit. The Diagnostic Trouble Code (DTC) sets when the BCM detects greater than 1.5 volts on the Wiper High/Low Relay Control circuit for greater than 1280 milliseconds.