Stop/Start Disable Switch 2 Circuit Low
Table of contents
B23C1 RAM Possible Causes
- Faulty Switch Bank Module
- Switch Bank Module harness is open or shorted
- Switch Bank Module circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B23C1 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B23C1 RAM code
The cost of diagnosing the B23C1 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B23C1 RAM Description
The Powertrain Control Module (PCM) monitors the Stop/Start Disable Switch 2 Circuit. The Diagnostic Trouble Code (DTC) sets when the PCM receives a message over the CAN BUS from the Body Control Module (BCM) that the Stop/Start Disable Switch circuit voltage is less than 0.0049 volts.