Driver Direction Control Motor
Table of contents
B2409 HYUNDAI Possible Causes
- Faulty Driver Direction Actuator
- Driver Direction Actuator harness is open or shorted
- Driver Direction Actuator circuit poor electrical connection
- Faulty Air Conditioner Control Module
How do I fix code B2409 HYUNDAI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2409 HYUNDAI code
The cost of diagnosing the B2409 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2409 HYUNDAI Description
The mode control actuator is mounted at the heater control unit. The mode control actuator consists of a motor and a feedback potentiometer. Pressing mode select switch makes the mode control actuator shift in the order of vent – B/L – floor – mix. The Diagnostic Trouble Code (DTC) sets when no movement to controlled mode position for 10 seconds.