Passenger Air Mix Door Motor
Table of contents
B2415 HYUNDAI Possible Causes
- Faulty Passenger Air Mix Actuator
- Passenger Air Mix Actuator harness is open or shorted
- Passenger Air Mix Actuator circuit poor electrical connection
- Faulty Air Conditioner Control Module
How do I fix code B2415 HYUNDAI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2415 HYUNDAI code
The cost of diagnosing the B2415 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2415 HYUNDAI Description
The Air Mix Actuator (Temperature actuator) located at the heater unit. It contains a temperature motor that changes temp door position and potentiometer that monitors the position of temp door. The Air mix actuator(Temperature actuator) regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of temp door by operating temp motor and then the temperature will be regulated by the hot/cold air ratio decided by the position of temp door. In operation, a potentiometer delivers temperature door position transformed into voltage value to A/C ECU.