Left Pinch Strip Open or Stuck High
Table of contents
B2425 HYUNDAI Possible Causes
- Faulty Left Pinch Strip
- Left Pinch Strip harness is open or shorted
- Left Pinch Strip circuit poor electrical connection
How do I fix code B2425 HYUNDAI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2425 HYUNDAI code
The cost of diagnosing the B2425 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2425 HYUNDAI Description
The Power Tail Gate(hereinafter PTG) is the system that moves tailgate of vehicle by an electronic motor so that the user can open or close the door with less force than required on manual operation. PTG consists of the drive unit, handle, switch, warning buzzer, anti-pinch(right/left) and cinch/latch(2 switches each). The anti-pinch switch is secondary protection equipment that prevents nipping in the door and has a steel point of contact in rubber strip. It is located at both sides(right/left) of gate. When an obstacle has been detected during a power closing operation, the PSD shall reverse direction and move to the fully open position (When an obstacle is detected during a power opening operation, the PSD shall stop)