Left Power Sliding Door Latch Cinch Pawl Switch Performance
Table of contents
B2508 RAM Possible Causes
- Binding Left Sliding Door Mechanism
- Faulty Left Power Sliding Door Latch
- Left Power Sliding Door Latch harness is open or shorted
- Left Power Sliding Door Latch circuit poor electrical connection
- Faulty Left Rear Door Module
How do I fix code B2508 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2508 RAM code
The cost of diagnosing the B2508 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2508 RAM Description
The Left Rear Door Module monitors the Left Power Sliding Door Latch Cinch Pawl Switch Performance. When the Left Rear Door Module senses the pawl switch was not detected as returning to ground during the transition between secondary and primary cinch operation. The left power sliding door latch may not be fully cinched during this condition. The left power sliding door latch may cinch to primary but not be fully seated and may pop off back to secondary.