Right Power Sliding Door Latch Release Overcurrent
Table of contents
B250C RAM Possible Causes
- Binding Right Sliding Door Mechanism
- Faulty Right Power Sliding Door Latch
- Right Power Sliding Door Latch harness is open or shorted
- Right Power Sliding Door Latch circuit poor electrical connection
- Faulty Right Rear Door Module
How do I fix code B250C RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B250C RAM code
The cost of diagnosing the B250C RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B250C RAM Description
The Right Rear Door Module monitors the Right Power Sliding Door Latch Release Overcurrent. When the Right Rear Door Module senses the latch motor stall current of 6.5 amps has been detected for over 150ms, with no pawl or ratchet failure this code will set.