Right Power Sliding Door Latch Cinch Pawl Switch Performance
Table of contents
B2512 RAM Possible Causes
- Binding Right Sliding Door Mechanism
- Faulty Right Power Sliding Door Latch
- Right Power Sliding Door Latch harness is open or shorted
- Right Power Sliding Door Latch circuit poor electrical connection
- Faulty Right Rear Door Module
How do I fix code B2512 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2512 RAM code
The cost of diagnosing the B2512 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2512 RAM Description
The Right Rear Door Module monitors the Right Power Sliding Door Latch Cinch Pawl Switch Performance. When the Right Rear Door Module senses the pawl switch was not detected as returning to ground during the transition between secondary and primary cinch operation. The Right power sliding door latch may not be fully cinched during this condition. The Right power sliding door latch may cinch to primary but not be fully seated and may pop off back to secondary.