Power Sliding Switch Circuit High
Table of contents
B2563 DODGE Possible Causes
- Faulty Power Sliding Switch
- Power Sliding Switch harness is open or shorted
- Power Sliding Switch circuit poor electrical connection
- Faulty Instrument Cluster
How do I fix code B2563 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2563 DODGE code
The cost of diagnosing the B2563 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2563 DODGE Description
Whenever the Cluster/CCN is awake and when the Cluster/CCN senses voltage over 4.95 volts (switch connected) on the Sliding Doors Overhead Switch MUX circuit for longer than 10 seconds, this code will set.