B Pillar Power Sliding Door Lockout Switch Circuit High
Table of contents
B257E DODGE Possible Causes
- Faulty Power Sliding Door Lockout Sense
- Power Sliding Door Lockout Sense harness is open or shorted
- Power Sliding Door Lockout Sense circuit poor electrical connection
- Switch Bank Shorted
- Faulty Instrument Cluster
How do I fix code B257E DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B257E DODGE code
The cost of diagnosing the B257E DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B257E DODGE Description
When the Cluster/CCN senses voltage above 4.95 volts (switch connected) on the Power Sliding Door Lockout Sense circuit for longer than 10 seconds, this code will set.