High Beams Are Inoperative
Table of contents
B2586 LINCOLN Possible Causes
- Faulty High Beam Relay
- High Beam Relay harness is open or shorted
- High Beam Relay circuit poor electrical connection
- Faulty Multifunction Switch
- Faulty Smart Junction Box (SJB)
How do I fix code B2586 LINCOLN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2586 LINCOLN code
The cost of diagnosing the B2586 LINCOLN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2586 LINCOLN Description
The Smart Junction Box (SJB) monitors the multifunction switch positions by sending out voltage reference signals to the multifunction switch through circuits. The return signal is sent through the circuit. When the multifunction switch is in the high beam position, the SJB provides a ground for the high beam relay coil (which is supplied battery voltage) through circuit. When the high beam relay is energized, power is routed to circuits from the BEC. The circuits supply power to the RH and LH high beams respectively. If a problem is detected with the circuits to the multifunction switch, the SJB will not provide a ground source for the high beam relay.