Right Cornering Lamp Circuit Short To Ground
Table of contents
B2595 GMC Possible Causes
- Faulty Right Cornering Lamp
- Right Cornering Lamp harness is open or shorted
- Right Cornering Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B2595 GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2595 GMC code
The cost of diagnosing the B2595 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2595 GMC Description
The cornering lamps are activated automatically at vehicle speeds below 25 MPH (40 km/h) when the turn signal/multifunction switch is placed in either the left or right turn positions and/or when the steering angle is changed from the straight-ahead position towards the side the vehicle is turning. When the Body Control Module (BCM) detects that one of these operations has occurred, the BCM responds to the cornering lamp request by applying voltage to cornering lamp control circuit illuminating the appropriate cornering lamp in the area that the vehicle is turning. The cornering lamps are deactivated automatically when the turn signal/multifunction switch is placed in the neutral position and/or the steering angle has returned in the straight-ahead position. The cornering lamps will not operate at vehicle speeds above 25 MPH (40 km/h).