Shift Position
Table of contents
B2602 NISSAN Possible Causes
- Faulty CVT Device
- CVT Device harness is open or shorted
- CVT Device circuit poor electrical connection
- Faulty Combination Meter
How do I fix code B2602 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2602 NISSAN code
The cost of diagnosing the B2602 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2602 NISSAN Description
The Body Control Module (BCM) monitors the Shift Position. The Diagnostic Trouble Code (DTC) sets when the BCM detects the following status for 10 seconds: Shift position is in P position, the Vehicle speed is 4 km/h (2 MPH) or more and the Ignition switch is in the ON position.