Starter Relay
Table of contents
B2608 NISSAN Possible Causes
- Faulty Intelligent Power Distribution Module Engine Room (IPDM E/R)
- IPDM E/R harness is open or shorted
- IPDM E/R circuit poor electrical connection
How do I fix code B2608 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2608 NISSAN code
The cost of diagnosing the B2608 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2608 NISSAN Description
Located in Intelligent Power Distribution Module Engine Room (IPDM E/R), it runs the starter motor. The starter relay is turned ON by the Body Control Module (BCM) when the ignition switch is in START position. IPDM E/R transmits the starter relay ON signal to BCM via CAN communication. The Diagnostic Trouble Code (DTC) sets when the BCM receives starter relay ON signal (CAN) from IPDM E/R even if BCM turns the starter relay OFF.