Left Daytime Running Lamps Control Circuit Short To Ground
Table of contents
B260D CADILLAC Possible Causes
- Faulty Left Daytime Running Lamps
- Left Daytime Running Lamps harness is open or shorted
- Left Daytime Running Lamps circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B260D CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B260D CADILLAC code
The cost of diagnosing the B260D CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B260D CADILLAC Description
The ambient light sensor is used to monitor outside lighting conditions. The ambient light sensor provides a voltage signal that will vary between 0.2 and 4.9 V depending on outside lighting conditions. The Body Control Module (BCM) provides a 5 V reference signal to the ambient light sensor and the Heating, Ventilation, and Air Conditioning (HVAC) Module provides a low reference ground. The BCM monitors the ambient light sensor signal circuit to determine if outside lighting conditions are correct for either daytime running lamps or automatic lamp control when the headlamp switch is in the AUTO position. In daylight conditions the BCM will command the designated daytime running lamps ON. During low light conditions the BCM will command the low beam headlamps ON. Any function or condition that turns on the headlamps will cancel daytime running lamps operation.