Interruption Of Engine Status Signal
Table of contents
B260F NISSAN Possible Causes
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How do I fix code B260F NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B260F NISSAN code
The cost of diagnosing the B260F NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B260F NISSAN Description
The Body Control Module (BCM) receives the engine status signal from Engine Control Module (ECM) via CAN communication. The Diagnostic Trouble Code (DTC) sets when the BCM has not yet received the engine status signal from ECM when ignition switch is in ON position