Cranking Request Circuit Short
Table of contents
B26F9 NISSAN Possible Causes
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B26F9 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B26F9 NISSAN code
The cost of diagnosing the B26F9 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B26F9 NISSAN Description
The Diagnostic Trouble Code (DTC) sets when the Body Control Module (BCM) detects that the status of the following signals does not match: Cranking request signal from Engine Control Module (ECM) and Starter control relay control signal from ECM (CAN).