Open Key Pellet
Table of contents
B2710 CADILLAC Possible Causes
- Faulty Ignition Key
- Faulty Steering Column Lock Cylinder
- Faulty Instrument Panel Cluster (IPC)
How do I fix code B2710 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2710 CADILLAC code
The cost of diagnosing the B2710 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2710 CADILLAC Description
When the ignition key is inserted in the ignition, the resistance of the key pellet is measured. Resistance is compared with resistance value stored in the Instrument Panel Cluster (IPC) memory. DTC B2710 will set when an open or zero resistance value is measured from key pellet prior to obtaining a valid resistance reading. DTC B2711 will set when an open or zero resistance value is measured from key pellet following a valid resistance reading. When DTC B2710 is set as current, IPC will display STARTING DISABLED, REMOVE IGNITION KEY message on drivers message center and prevent the vehicle from starting. When DTC B2711 is set as current, IPC will display THEFT SYSTEM PROBLEM, CAR MAY NOT RESTART message on drivers message center and allow the vehicle to continue to run.