Hill Descent Control Switch Short To Ground
Table of contents
B273A CADILLAC Possible Causes
- Faulty Multifunction Switch Instrument Panel
- Multifunction Switch Instrument Panel harness is open or shorted
- Multifunction Switch Instrument Panel circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B273A CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B273A CADILLAC code
The cost of diagnosing the B273A CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B273A CADILLAC Description
The Body Control Module (BCM) monitors the signal circuit from the Hill Descent Control Switch. The hill descent switch is a momentary switch that is normally open. When the hill descent control switch is pressed once, the body control module will request the electronic brake control module via serial data to disable or enable the hill descent control. When activated, the switch grounds the hill descent control system signal circuit. The electronic brake control module then enables or disables the hill descent control system. The electronic brake control module will request the instrument cluster via serial data to turn the hill descent indicator ON or OFF to notify the driver.