Memory 2 Select Switch Circuit
Table of contents
B2760 CADILLAC Possible Causes
- Faulty Seat Memory Switch Driver
- Seat Memory Switch Driver harness is open or shorted
- Seat Memory Switch Driver circuit poor electrical connection
- Faulty Seat Memory Control Module
How do I fix code B2760 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2760 CADILLAC code
The cost of diagnosing the B2760 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2760 CADILLAC Description
The Memory Select Switch signal circuits are supplied 12 volts through a resistor and monitored within the Seat Memory Control Module. When a memory select switch is pressed, the signal circuit is closed to ground and the signal circuit voltage is pulled low. The Diagnostic Trouble Code (DTC) sets when a memory select switch input to the memory seat module is active for more than 30 seconds.