Driver Memory Set Switch Circuit
Table of contents
B2765 CADILLAC Possible Causes
- Faulty Seat Memory Switch Driver
- Seat Memory Switch Driver harness is open or shorted
- Seat Memory Switch Driver circuit poor electrical connection
- Faulty Seat Memory Control Module
How do I fix code B2765 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2765 CADILLAC code
The cost of diagnosing the B2765 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2765 CADILLAC Description
Low reference is supplied to the driver Seat Memory Switch from the Seat Memory Control Module. When a memory switch is pressed, the signal circuit from the Seat Memory Control Module is pulled low through the switch contacts and a series of resistors indicating the memory recall request. In response to this signal, the seat memory control module commands the appropriate seat motors to move to the pre-recorded seat positions stored in memory. If the memory set switch signal is active for greater than 30 seconds, the module will set this Diagnostic Trouble Code (DTC).