Suspension Control Select Switch Circuit Malfunction
Table of contents
B2795 CADILLAC Possible Causes
- Faulty Suspension Control Select Switch
- Suspension Control Select Switch harness is open or shorted
- Suspension Control Select Switch circuit poor electrical connection
- Faulty Electronic Stability Control (ESC) Module
How do I fix code B2795 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2795 CADILLAC code
The cost of diagnosing the B2795 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2795 CADILLAC Description
The Electronic Stability Control (ESC) module supplies 5 volts and ground to the suspension control switch voltage pider circuit. The suspension control switch changes the resistance value of the switch circuit which alters the voltage level received by the ESC module on the suspension control signal circuit. There are two possible voltage levels, and each voltage level corresponds to a switch selection position. The two switch positions are TOUR and SPORT. The ESC module monitors the voltage level on the suspension control switch signal circuit, and will set a Diagnostic Trouble Code (DTC) if the detected voltage level is not within the calibrated amount.