Quick Charge Permit Signal Error
Table of contents
B2803 NISSAN Possible Causes
- Faulty Quick Charger
- Quick Charger harness is open or shorted
- Quick Charger circuit poor electrical connection
- Faulty Quick Charger Connector
- Faulty Power Delivery Module (PDM)
How do I fix code B2803 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2803 NISSAN code
The cost of diagnosing the B2803 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2803 NISSAN Description
The Diagnostic Trouble Code (DTC) sets after the charge start/stop 1 signal is received from the quick charger, the quick charge connector lock signal is received from the quick charger via quick charger communication even though the charge permit signal is not being output by the PDM (Power Delivery Module).