Left Reverse Lamp 2 Control Circuit Short
Table of contents
B2873 RAM Possible Causes
- Faulty Left Rear Turn Lamp Driver
- Left Rear Turn Lamp Driver harness is open or shorted
- Left Rear Turn Lamp Driver circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B2873 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- B2873-11 LEFT REVERSE LAMP 2 CONTROL CIRCUIT SHORT TO GROUND
- B2873-15 LEFT REVERSE LAMP 2 CONTROL CIRCUIT SHORT TO BATTERY OR OPEN
Cost of diagnosing the B2873 RAM code
The cost of diagnosing the B2873 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2873 RAM Description
The Body Control Module (BCM) receives a communication network message from the Steering Column Control Module (SCCM) requesting turn signal lamp illumination. When this bus message is received, the BCM provides a pulsed voltage output through the rear turn signal control circuit. The rear turn signal control circuit connects to the Turn Signal Lamps. The Diagnostic Trouble Code (DTC) sets when the Body Control Module (BCM) detects a low or high condition on the Left Rear Turn Lamp Driver circuit.