Driver Door Open Switch Circuit Not Plausible
Table of contents
B297C GMC Possible Causes
- Faulty Door Latch Assembly-Driver
- Door Latch Assembly-Driver harness is open or shorted
- Door Latch Assembly-Driver circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B297C GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B297C GMC code
The cost of diagnosing the B297C GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B297C GMC Description
The keyless entry control module provides a 12V signal to the driver door open switch signal circuit. The driver window motor provides a 12V signal to the driver door ajar switch signal circuit. The door open switches and the door ajar switches are integral to the driver door latch assembly.
The door open switch and the door ajar switch contacts will be open with the door is fully closed, the door switches within the door latch are designed so that the when the door is ajar, the contact in the door ajar switch closes, the voltage is pulled low and the window motor will then send a serial data message to the Body Control Module (BCM) indicating that the door is ajar. When the door is opened further, the contact in the door open switch will then close providing a ground for the door open signal circuit, the keyless entry control module will then detect that the door is open.