Normal Chart Port
Table of contents
B29A0 NISSAN Possible Causes
- Faulty Normal Chart Port
- Normal Chart Port harness is open or shorted
- Normal Chart Port circuit poor electrical connection
- Faulty Power Delivery Module (PDM)
How do I fix code B29A0 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B29A0 NISSAN code
The cost of diagnosing the B29A0 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B29A0 NISSAN Description
The Diagnostic Trouble Code (DTC) is set when at the start of charging or during charging, the EVSE connection detection signal voltage is approximately 4.8 V or more, or 1.0 V or less, continuously for 3 seconds or more.