Right Front Lamp Low Beam Circuit Open
Table of contents
B2A2E MERCURY Possible Causes
- Faulty Headlamp Switch
- Headlamp Switch harness is open or shorted
- Headlamp Switch circuit poor electrical connection
- Faulty Smart Junction Box (SJB)
How do I fix code B2A2E MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B2A2E MERCURY code
The cost of diagnosing the B2A2E MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B2A2E MERCURY Description
The Smart Junction Box (SJB) sends voltage signals to the headlamp switch to monitor the OFF, PARKING LAMPS ON and HEADLAMPS ON positions. At any given time, the headlamp switch routes one of the input circuits to ground. When the SJB detects the headlamp switch in the HEADLAMPS ON position with the multifunction switch in the LOW BEAM position, the SJB provides voltage to the LH and RH low beam headlamps. The Diagnostic Trouble Code (DTC) set when the SJB detects a short to voltage from the RH low beam output circuit.