Hazard Lamps Request Circuit Malfunction
Table of contents
B3596 CADILLAC Possible Causes
- Faulty Turn Signal/Multifunction Switch
- Turn Signal/Multifunction Switch harness is open or shorted
- Turn Signal/Multifunction Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B3596 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B3596 CADILLAC code
The cost of diagnosing the B3596 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B3596 CADILLAC Description
The hazard flashers may be activated in any power mode. The hazard warning switch signal circuit is momentarily grounded when the hazard warning switch is pressed. The Body Control Module (BCM) responds to the hazard warning switch signal input by supplying battery voltage to all four turn signal lamps in an ON and OFF duty cycle. When the hazard warning switch is activated, the BCM sends a serial data message to the instrument cluster requesting both turn signal indicators to be cycled ON and OFF. The Diagnostic Trouble Code (DTC) sets when the BCM detects a short to ground in the hazard warning switch signal circuit.