Head-Up Display Information Up Switch Circuit
Table of contents
B3620 GMC Possible Causes
- Faulty Head-Up Display Information Up Switch
- Head-Up Display Information Up Switch harness is open or shorted
- Head-Up Display Information Up Switch circuit poor electrical connection
How do I fix code B3620 GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B3620 GMC code
The cost of diagnosing the B3620 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B3620 GMC Description
The Head-Up Display (HUD) monitors the HUD information-up switch signal circuit in order to perform the switch functions. When the HUD information-up switch is depressed and the ignition is in the RUN position, the switch signal to the HUD is low. When the HUD detects that the HUD information-up switch signal is low for greater than 60 seconds, the Diagnostic Trouble Code (DTC) B3620 sets.