Intermittent Wiper Delay Input Circuit High


Table of contents

B3703 SATURN Possible Causes

  • Faulty Windshield Wiper Washer Switch
  • Windshield Wiper Washer Switch harness is open or shorted
  • Windshield Wiper Washer Switch circuit poor electrical connection
  • Faulty Body Control Module (BCM)

How do I fix code B3703 SATURN?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the B3703 SATURN code

  The cost of diagnosing the B3703 SATURN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B3703 SATURN Description

  The intermittent switch in the windshield wiper washer switch is a voltage pider connected across the Body Control Module (BCM) inputs circuits windshield wiper switch signal circuit and windshield wiper switch low reference circuit. The front wiper relay is energized by the BCM switching the front wiper relay control circuit to ground. The Diagnostic Trouble Code (DTC) sets when the windshield wiper switch signal circuit is greater than 4.71 volts, open or shorted to voltage.

Leave a Reply

Your email address will not be published. Required fields are marked *