Cruise Control Function Request Circuit
Table of contents
B3794 CADILLAC Possible Causes
- Faulty Cruise Control Switch
- Cruise Control Switch harness is open or shorted
- Cruise Control Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B3794 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B3794 CADILLAC code
The cost of diagnosing the B3794 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B3794 CADILLAC Description
The Cruise Control Switch is an input to the Body Control Module (BCM). The BCM monitors the cruise control on/off, set/coast, resume/accelerate and cancel switches via the cruise control switch signal circuit in order to detect when the driver has requested to perform a cruise control function. The BCM detects a specific voltage signal on the cruise control switch signal circuit when a switch is applied. The Engine Control Module (ECM) receives the requested cruise control switch function from the BCM via a serial data message. The BCM monitors the cruise control switch. The BCM sets the OBDII code when the cruise control switch is not to factory specifications.